Skip to content

Draft and depth checker

Relief depth and sidewall draft, checked against PCI guidance for architectural precast.

1/8"2"
Steep (1:1)Shallow (1:16)

1 : n means one inch of taper for every n inches of depth. Smaller n is steeper and strips easier.

Feature type

Verdict

    Based on PCI Designer's Notebook DN-34, Formliners and Lettering for Architectural Precast Concrete, and PCI MNL-122, Architectural Precast Concrete, section 3.3.2: keep design depth generally in the half inch to one inch range, hold a 1:8 draft on all indentation sides, go to 1:6 for narrow ribbed panels and delicate units, and give relief deeper than an inch a wide depressed area.

    Designing for the formliner → Next: spec hub → Write the specification →

    Request a sample Call